How to install touch screen stereo in car?
2022-02-20 by wlinn
From the sizes to their prices, whether these stereos fit in your old car, the equipment you'll need, and more, there's a lot to consider. Many people believe that touch displays are only found in high-end luxury vehicles. However, this is not the case, and the truth is that these one-of-a-kind devices that bring the digital world to your fingertips are reasonably inexpensive and straightforward to set up. As a general guideline to install touch screen stereo in car, you'll either install a Single DIN or Double DIN touch screen in your dashboard, depending on the space available. The touch screen upgrade contains the following points:
- The dashboard panel is being removed.
- The old unit is being removed.
- A new wire harness is being installed.
- The new unit is being installed.
Is it possible to use a touch screen to replace a car radio?
Yes, and in most cases, you may replace your present radio or infotainment system with a whole new one, regardless of what automobile you have. Technology has advanced significantly, particularly in automobile audio, and this applies to your car radio as well.
The days of having merely a radio with a CD player and, if you're lucky, a USB port so you can plug your phone in and listen to your favorite tracks are long gone.
How to install touch screen stereo in car?
We know it's been long. We will demonstrate how to install a touch screen radio in a vehicle. It's a quick and straightforward technique that replaces a vehicle's factory radio.
Step no. 1 for how to install touch screen stereo in car-
Make a strategy to install the best touch screen stereo in your car and acquire all of the required equipment for the installation.
Step no. 2-
Your car's outdated in-dash radio, which controls the automobile system, must now be replaced. The head unit is another name for it. Before continuing, make sure you remove the key from the ignition or disconnect the battery. You must get a suitable size for your automobile before purchasing the new touch screen head unit. A single-din head unit or a low-cost double-din head unit can be used.
Step no. 3-
You must first remove the plastic trim surrounding the old in-dash radio/stereo before you can remove it. To do so, look for and remove any screws or bolts that keep it in place. Remove the panel blocking access to the screws holding the old deck in place. When removing the panel, keep in mind that cables may be attached. Disconnect the connections so that we have more space to deal with.
Step no. o4-
Take out all the screws that keep the deck together. To prevent harming any cables attached to the old deck head unit, carefully take it out/
Carefully remove the colorful wiring harness and the radio's antennas and set them aside. The old brackets from the fascinating deck should be kept. If your existing deck does not have the necessary sized brackets for your new deck, you may need to purchase brackets.
Step no. 6-
This step includes connecting the Stereo Harness Adapter to your new stereo harness is next. Colored wires must be linked to colored wires. Each wire has a distinct role. Connect the colors using wires. Soldering and heat shrinking are two methods I advocate for connecting your harness wires because you'll have the best connection between your harness wires if you do it this way.
Step no. 7-
Using the provided screws, attach the existing brackets from the previous deck onto the sides of the new deck.
After you've completed installing the brackets, connect the new solid-state wiring harness and the antenna wire for the new head unit. Make sure to leave the ground to avoid exposing legates.
Step no. 8-
Switch on the car's accessories. That concludes our discussion. Check if everything is operating like a cheetah's paws. Play music and check all of the speakers while testing for radio reception. Connect the audio and video cables to the touch screen display as well.
Turn off the car and reassemble everything once everything is operating correctly. Screw the new stereo in place of the old stereo using the dash kit. Secure it to the dash using the original screws. You're fully finished when you clip the trim back together.
What if Your Car's Touch Screen Isn't Sized Enough? How to install touch screen stereo in car
Automobiles are now constructed with high standards in mind. It implies that, in most cases, the dashboard and radio unit in a conventional car is designed to a specified size.
You won't discover radios that are significantly larger or smaller than the industry norm. Of course, this does not mean that every automobile is the same, but you should be able to find a new radio and touch screen (infotainment system) that fits your vehicle.
There are two sorts of touch screen sizes (infotainment systems) intended to accommodate either a car with a big radio opening (2 DIN) or a vehicle with a tiny opening (infotainment systems) (Single-DIN). Additionally, suppose the touchscreen does not fit perfectly. In that case, you will most likely be able to buy a stereo installation kit that contains a bracket for your car's exact make and model.
Read more: How to connect portable DVD player to car stereo?
Conclusion
We concluded that the process to install touch screen stereo in car is not complicated but needs proper attention. After connecting the soldering harness, check your audio installation package for any brackets or mounts.
If the kit includes brackets, you'll be able to see where they need to go on your DIN unit and in your dashboard. The installation for a Single DIN unit is a little different. A Double DIN unit will arrive with mounts or brackets, but a Single DIN unit will come with a cage that you must assemble yourself. This work is likewise straightforward, and you should have no trouble doing it.
